H35 Pneumatic Shielding Box
  • Introduction
  • Parameter
  • Download
  • Video
  • Shielding box, made by metal, is a common test equipment for preventing the leakage of electromagnetic wave outwards or inwards.

    Comparing to the large-volume shielding rooms, which are common in the labs, shielding boxes are more welcome on the production floors due to small volume.

    Shielding boxes are widely used in the test of different communication standards: WiFi, LTE, Bluetooth, GSM, CDMA, WCDMA, WiMAX, RFID, Zigbee, etc. It is common for the board-level or assembly test of mobile phones, wireless access points, wireless routers, Bluetooth headsets, car remotes, walkie-talkie, TPMS, etc.

  •   Interior Dimension(W x D x H)   135x182x104 mm   Input Voltage   DC24V, 1A
      Exterior Dimension(W x D x H)
      159x224x198 mm   Air Pressure   0.7Mpa (7Kgf/cm²)
      Material   Electrogalvanized sheet
      Cylinder stroke   100 mm
      Stroke     Input Air   Dry Air
      Isolation(with filters)   70dB up (2.4GHz and 5.8GHz)    Power   25 W
      Weight (with absorber)   10Kg   Operation Temperature   0°C ~ +80°C
      Chamber Open   Trigger with One Button   Chamber Open Time   2~4 sec(Adjustable)
      Chamber Close   Trigger with Two Buttons   Chamber Close Time   2~4 sec(Adjustable)
      Metal Finishing   Paint   Operation Life
      1,000,000 times
      Filter numbers   1   RF Connectors   SMA *3

  • Not Available
Home Phone Contact